ORNAMENT

Make Two-Tone Chocolate
Wax Tablets for Valentine's Day

Chocolate Bar Silicone Mold for Valentine's Day
Make sweet chocolate wax tablets.

White, beige, blush pink, and ruby, a total of four pigment chips,
are used to express the romantic two-tone color of Valentine's Day.

By adding the scent of iris, which has the flower language of a message of love,
prepare for a special Valentine's Day that will satisfy your loved one's senses of sight and smell.

01

Need to Prepare

Prepare Chocolate Bar Silicone Mold (4-Cavities), White Beeswax Pellets 30g, Fragrance Oil (Iris base) 4g, Pigment Chips (White, Beige, Blush Pink, Ruby), Digital Electronic Scale, Infrared Digital Thermometer, Hot Plate, Glass Rod, Heat Tool, Stainless Beaker, Indie Pink Grosgrain Ribbon (5mm/1 Roll), Clear Cover & White Tablet Box, Ivory Decorative Sheet.

02

Weighing Wax

To make one Two-Tone Chocolate Wax Tablet, 30g of White Beeswax Pellets is required, and 120g of wax is required for four tablets. When working with molds with many details, Beeswax with good shrinkage is recommended.
If you blend Pillar Wax or other Waxes at a ratio of 1:1, bubbles may form, and the shape of the chocolate may not come out clearly.

* In the photo, 100% White Beeswax Pellets were used.

03-1

Main Color Matching

You will need wax to express a total of two colors.
(For the Pink Color, small amounts of Pigment Chip Beige, Blush Pink, and Ruby were used.)
Since it uses two colours, it is used as a Pigment Chip that does not discolour even after a long time.

03-2

Matching Sub Colors

Prepare 15g of wax with a small amount of Pigment Chip White.

04-1

Add The Main Color Fragrance Oil

When the pink color wax containing 15g of the primary color reaches 90℃, add about 10% of the wax weight in Fragrance Oil and mix well.

* Wax Tablets may contain Fragrance Oils up to 15% of the maximum dose.
** In the photo, 2g of Iris Base(steeling ingredient) was added to the pink colored wax.

04-2

Add Sub Color Fragrance Oil

Add oil to 15g of sub-color wax in the same way as in 4-1 above.

05

Wax Pouring

Preheat the mold with a Heat Tool before pouring it into the mold. For molds with many delicate expressions, using the Heat Tool to reduce the temperature difference between the mold and the wax can make a finished product.
Pour the created two-tone color (pink/white) quickly from each corner.

* Adjust the amount of color you want more color to come out and pour it.

06

Demolding

When the mold is cooled down, slowly separate the hardened wax from the outside by giving a little space on all sides of the mold. If the mold is not completely cooled, the wax tablet may break if you remove it with solid force.

07

Decorating

Tie a 5mm thick ribbon neatly to the hole in the left corner of the tablet for decoration.

* In the photo, 5mm Indie Pink Grosgrain Ribbon was used.

08

Finishing

Put the Ivory Decorative Sheet in the Tablet Packaging Box to protect the finished Two-Tone Chocolate Wax Tablet, complete the packaging by inserting a clear cover.
You can further decorate it with ribbons or stickers depending on your preference.

*In the photo, a Clear Cover & White Tablet Box was used.