Silver Motif Transfer Sticker

How to Use

1. Cut the text cleanly with a knife or scissors with a square margin. 
 
2. After removing the vinyl coated paper, place the gold text part upside down on the wax tablet. (The tablet should be a perfectly flat surface!)
 
3. Spray water gently with a sprayer on the other thick paper.

(Water should not be too much or too less. If the water is too much, the transfer paper may be torn or the gold leaf may peel off during the water discharge.) 
 
4. Rub it softly so that it sticks well.

5. With the text in close contact, slide the thick paper down and slide it out softly. (Please be careful that If you remove it harshly by hand, it may be torn off.)

Failure Case:  a case that the paper is pressed against the wax tablet <- Too much water.

How to Use The Transfer

make 1. Cut The Transfer

Cut out the desired illustration from the transfer with a knife or scissors.

make 2. Remove The Coating Film

Remove the coating film, being careful not to get any contaminants such as dust.

make 3. Put in Place

Turn the gold illustration part upside down on the container and place it on top.

Before spraying with water, press the illustration part with your hand to make the surface adhere.

(If used on a wax tablet, the surface must be flat.)

make 4. Water on Paper

Gently spray water on the paper using a sprayer, etc.

At this time, if there is too much water, the transfer paper may tear or the gold foil may come off, and if there is too little water, the illustration may not stick properly.

make 5. Remove The Paper

When the paper is wet and images or text are visible, gently press the paper in close contact with the surface and slide it up or down to remove it.
If you hold the paper, the gold foil may come off.

make 6. Remove The Water

Dry the surface moderately to finish.