English
PC Star Cone Mold
Reviews 175 · 5
| Size | Dia. 9.5cm Height 19cm(Size of finished Candle) |
|---|---|
| Material | Polycarbonate Plastic |
| Wax Needed | App. 280g |
| Max Fragrance Load | App. 10% of Wax |
| Wick | Smokeless Wick #3, White Cotton Wick #3 Cautions- A permanent plastic mold that can be reused many times. - Do not use a hot air heater or heat gun when cleaning molds / removing wax as it may cause mold deformation. - Mold release spray is recommended in order to take out the candle from the mold easily. |
- 1 pc 12.69 (USD)
Fancy & Eye-catching Shape
PC Star Cone Mold
Smooth Star Cone Mold where each angle is alive.
The sharp edge line reminiscent of a star is attractive unlike other molds.
By using palm wax or a specific season color, you can make unique an objet candle, especially in winter.
This mold is a product designed and manufactured by Candleworks. It is forbidden to reproduce without permission and can be held liable in case of violation.
Point 1. Composition
PC mold of Dia. 9.5cm, Height 19cm (Size of finished candle)
A permanent mold made of polycarbonate plastic that can be reused many times.
App. 280g of wax is needed to make a candle.
Point 2. Season Feeling Design
The Star Cone mold, which feels like a simplified design of the tree, goes well with winter season. Depending on the colors it can even create sensuous objet that the angle is alive. By adjusting the amount of wax, variety of sizes from small to large can be made.
Point 3. Made by CW
CW logo or wordmark are imprinted on the top of the mold border or near the wick line.
The product is designed by CW and copying the mold is strictly forbidden. Any violation by unauthorized copy can be held liable.
Point 4. Comparing the Sizes
Reference photo to show size differences between pyramid mold, penta mold, star cone mold, and large cone mold.
PC Star Cone Mold (9.5x19cm)
| Size | Dia. 9.5cm x Height 19cm |
|---|---|
| Material | Polycarbonate Plastic |
| Wax Needed | App. 280g |
| Max Fragrance Load | App. 10% of Wax |
| Recommended Wick | Smokeless Wick #3, White Cotton Wick #3 |
| Characteristics | - A permanent plastic mold that can be reused many times. |
How to Use a PC Mold
make 1. Insert Wick &
To prevent leaking after inserting the wick into the hole, block the wick hole by using the Mold Sealer.
make 2. Spray Mold Release Sprayer
Fix the wick and spray a mold release sprayer inside the mold. The release spray forms a thin, oily coating to help the candles separate smoothly from the mold.
make 3. Melting Wax
Melt the wax according to the mold capacity.
make 4. Coloring
Use Oil Soluble Liquid Dyes, Color Blocks, or Pigment Chips to create the desired color to suit your application.
make 5. Mixing Fragrance Oil
The temperature varies depending on the type of wax, but add fragrance oil around 80 ~85 degrees and stir well for about 1 minute.
make 6. Pouring Wax
Based on pillar wax, pour the wax into the mold at about 75~85 degree Celsius.
make 7. Fixing the Wick
Using a wick clip, gently pull the wick and fix it in the center of the mold.
make 8. Pouring for the Second Time
When the surface of the wax is hardened a bit, prick around the wick and pour wax into empty space.
make 9. Removing the Mold Sealer
Remove the mold sealer before taking out the candle once the wax is completely hardened.
make 10. Taking out the Candle
After confirming that the mold has cooled down completely, gently press the parts of the mold that wax is shrunk less. It will help to take out the candle a little better. Take out the candle and organize the wick.
Related Products
