English
PC Small Sphere Mold
Reviews 284 · 5
| Size | Dia. 6.5cm Height 6.5cm(Size of finished Candle) |
|---|---|
| Material | Polycarbonate Plastic |
| Wax Needed | App. 125g |
| Max Fragrance Load | App. 10% of Wax |
| Wick | Smokeless Wick #3, White Cotton Wick #3 |
| Cautions | - A permanent plastic mold that can be reused many times. - Do not use a hot air heater or heat gun when cleaning molds / removing wax as it may cause mold deformation. - Mold release spray is recommended in order to take out the candle from the mold easily. - The mold is separated up and down, creating a seam in the center of the candle. After completion, scrape it gently with a knife to clean the surface. - Clamp the sides of the mold with tongs before you pour in the wax to prevent wax leakage. |
- 1 pc 6.08 (USD)
Smooth Surface & Right Size
PC Small Sphere Mold
Simple & Spherical Small Sphere Mold.
It is so nice to place anywhere as an objet, and widely used at candle making classes as well as for sales.
Can be applied to a variety of applications with a smooth & neat design in the shape of a sphere.
This mold is a product designed and manufactured by Candleworks.
It is forbidden to reproduce without permission and can be held liable in case of violation.
Point 1. Composition
PC mold of Dia. 6.5cm, Height 6.5cm (Size of finished candle)
A permanent mold made of polycarbonate plastic that can be reused many times.
App. 125g of wax is needed to make a candle.
Point 2. Neat Spherical Design
Its smooth surface and cute size make it possible to combine with a variety of candles.
It is a basic spherical shaped design.
The mold is separated up and down, creating a seam in the center of the candle.
Point 3. Made by CW
CW logo or wordmark are imprinted on the top of the mold border or near the wick line.
The product is designed by CW and copying the mold is strictly forbidden.
Any violation by unauthorized copy can be held liable.
Point 4. Wax Leakage Prevention Method
Clamp the sides of the mold with tongs before pouring in the wax to prevent wax leakage and ensure a stable candle.
Point 5. Comparing the Sizes
Reference photo to show size difference between small sphere, large sphere, and square molds.
PC Small Sphere Mold (6.5x6.5cm)
How to Use a PC Mold
make 1. Insert Wick & Block the Hole Using Mold Sealer
To prevent leaking after inserting the wick into the hole, block the wick hole by using the Mold Sealer.
make 2. Spray Mold Release Sprayer
Fix the wick and spray a mold release sprayer inside the mold. The release spray forms a thin, oily coating to help the candles separate smoothly from the mold.
make 3. Melting Wax
Melt the wax according to the mold capacity.
make 4. Coloring
Use Oil Soluble Liquid Dyes, Color Blocks, or Pigment Chips to create the desired color to suit your application.
make 5. Mixing Fragrance Oil
The temperature varies depending on the type of wax, but add fragrance oil around 80 ~85 degrees and stir well for about 1 minute.
make 6. Pouring Wax
Based on pillar wax, pour the wax into the mold at about 75~85 degree Celsius.
make 7. Fixing the Wick
Using a wick clip, gently pull the wick and fix it in the center of the mold.
make 8. Pouring for the Second Time
When the surface of the wax is hardened a bit, prick around the wick and pour wax into empty space.
make 9. Removing the Mold Sealer
Remove the mold sealer before taking out the candle once the wax is completely hardened.
make 10. Taking out the Candle
After confirming that the mold has cooled down completely, gently press the parts of the mold that wax is shrunk less. It will help to take out the candle a little better. Take out the candle and organize the wick.
Category Best
- 60%
- 50%
- 70%