Cherry Blossom Flower Mold (11-cavities)

Reviews 35 · 5

Size	Width about 2.7cm, Length about 2.7cm, Height about 1cm (Based on 1 cherry blossom)
Material	Silicone
Characteristic	- We recommend using Paraffin 160 or Beeswax. - You'll need about 20.5 grams of wax to make 11 Cavity. - Due to the high level of detail in the mold, the petals may crack when demolding, which is not a reason for a return. - Made of heat-resistant and flexible silicone, the mold can be poured with higher temperatures of wax. - We recommend the use of pigment chips when coloring decorative molds in consideration of migration. - After use, please wash and dry thoroughly and store in a place away from sunlight.

1 pc 3.85 (USD)

Price 3.85 (USD)

Purchase options load in the storefront app

Fluttering Cherry Blossom Petals Mold
Cherry Blossom Flower Mold (11-Cavity)

This Cherry Blossom Flower Mold depicts cherry blossom buds and
petals fluttering in the spring breeze.

The mold is 1cm thick to give it a three-dimensional look.
This mold can be used for tealight candles, container candles, and even wax tablets.

Pigment Chips are available to create two-tone colors without migration.

Point 1. Design

A Cherry Blossom Flower Mold with a width of about 2.7cm, a length of about 2.7cm,
and height of about 1cm, with 6 flower buds and 5 petals.
Approximately 20.5 grams of wax is required to make 1 plate (11 Cavity)
(3 grams of wax is required to make 1 bud and 0.5 grams of wax is required to make 1 petal).

Tip. Fragrance oil ratios when making wax tablets
20.5 grams of wax: 2.5 grams of fragrance oil (10% of the total volume is recommended)

Point 2. Composition

The Cherry Blossom Flower mold consists of 11cavity.
It is good to check the finished color with a translucent silicone mold.

Point 3. Building and Demolding Tips

Due to the amount of detail in the mold, the leaves may crack when demolding.
Carefully remove the finished candle from the mold to avoid breaking the leaves.
If you find it difficult to de-mold, you can do so by cutting a sheath around the opening.

Warming the inside of the silicone mold before pouring
the wax into it will help the wax get in and reduce bubbles.

We recommend warming the inside of the silicone mold in the microwave
for about 30 seconds to 1 minute or using a heat tool or hot air blower before crafting.

"How to Make Cherry Blossom Tealights

Cherry Blossom Flower Mold (11-Cavity)

Size	Width about 2.7cm, Length about 2.7cm, Height about 1cm (Based on 1 cherry blossom)
Material	Silicone
Characteristic	- We recommend using Paraffin 160 or Beeswax. - You'll need about 20.5 grams of wax to make 11 Cavity. - Due to the high level of detail in the mold, the petals may crack when demolding, which is not a reason for a return. - Made of heat-resistant and flexible silicone, the mold can be poured with higher temperatures of wax. - We recommend the use of pigment chips when coloring decorative molds in consideration of migration. - After use, please wash and dry thoroughly and store in a place away from sunlight.