#3 PC Flat Pillar Mold (7x13cm)

Reviews 594 · 5

Size	Dia. 7cm, Height 13cm (Size of finished Candle)
Material	Polycarbonate Plastic
Wax Needed	App. 420g
Max Fragrance Load	App. 10% of Wax
Recommended Wick	Smokeless Wick #4, White Cotton Wick #4 Cautions- A permanent plastic mold that can be reused many times. - Do not use a hot air heater or heat gun when cleaning molds / removing wax as it may cause mold deformation. - Mold release spray is recommended in order to take out the candle from the mold easily.

1pc 7.31 (USD)
3pcs 20.54 (USD)

Price 7.31 (USD)

Purchase options load in the storefront app

Simple & Modern
PC Flat Pillar Mold (7x13cm)

Flat Pillar Mold that the flat upper part creates a clean & modern feeling.

Steady popularity of modern Design.
As the mold is transparent, it is easy to check the color, and various types of waxes can be used such as soy, palm, or paraffin.

This mold is a product designed and manufactured by Candleworks. It is forbidden to reproduce without permission and can be held liable in case of violation.

Point 1. Composition

PC mold of Dia. 7cm, Height 13cm (Size of finished candle)
A permanent mold made of polycarbonate plastic that can be reused many times.
App. 420g of wax is needed to make 1 candle.

Point 2. Neat & Modern Design

In the form reminiscent of a cylinder, you can feel the modern charm in the flatness of the upper part that just falls straight.
Make sure to seal the wick hole by using Mold Sealer before pouring wax.

Point 3. Made by CW

CW logo or wordmark are imprinted on the top of the mold border or near the wick line.
The product is designed by CW and copying the mold is strictly forbidden. Any violation by unauthorized copy can be held liable.

Point 4. Comparing the Sizes

Reference photo to show size differences between flat pillar molds.

PC Flat Pillar Mold (7x13cm)

Size	Dia. 7cm x Height 13cm
Material	Polycarbonate Plastic
Wax Needed	App. 420g
Max Fragrance Load	App. 10% of Wax
Recommended Wick	Smokeless Wick #4, White Cotton Wick #4
Characteristics	- A permanent plastic mold that can be reused many times. - Do not use a hot air heater or heat gun when cleaning molds / removing wax as it may cause mold deformation. - Mold release spray is recommended in order to take out the candle from the mold easily.

How to Use a PC Mold

make 1. Insert Wick &

Block the Hole Using Mold Sealer

To prevent leaking after inserting the wick into the hole, block the wick hole by using the Mold Sealer.

make 2. Spray Mold Release Sprayer

Fix the wick and spray a mold release sprayer inside the mold. The release spray forms a thin, oily coating to help the candles separate smoothly from the mold.

make 3. Melting Wax

Melt the wax according to the mold capacity.

make 4. Coloring

Use Oil Soluble Liquid Dyes, Color Blocks, or Pigment Chips to create the desired color to suit your application.

make 5. Mixing Fragrance Oil

The temperature varies depending on the type of wax, but add fragrance oil around 80 ~85 degrees and stir well for about 1 minute.

make 6. Pouring Wax

Based on pillar wax, pour the wax into the mold at about 75~85 degree Celsius.

make 7. Fixing the Wick

Using a wick clip, gently pull the wick and fix it in the center of the mold.

make 8. Pouring for the Second Time

When the surface of the wax is hardened a bit, prick around the wick and pour wax into empty space.

make 9. Removing the Mold Sealer

Remove the mold sealer before taking out the candle once the wax is completely hardened.

make 10. Taking out the Candle

After confirming that the mold has cooled down completely, gently press the parts of the mold that wax is shrunk less. It will help to take out the candle a little better. Take out the candle and organize the wick.